ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: I have 2 600w 12s from EAW adn i built them a box but i know im not maxamizing the speakers.  (Read 1461 times)


  • Newbie
  • *
  • Offline Offline
  • Posts: 1

ok i have a box thats 30" by 16"  by 11.5"  and no ports, i dont know what to calculate for how big the ports should be and how long the tube in the port should be ,   does anybody have a suggestion

Dave Rickard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2903

After you put your complete name in your profile alias here, google WinISD and get software which will get you started.  ISDonline will get you started too.
Yorkville dealer

"The wrong piece of gear, at the right price, is still the wrong piece of gear."

"If you don't have good stuff at each end of the signal chain, (mics and speakers) what you use in between is just turd polish."--Dave Dermont

Mac Kerr

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 10223
Name policy
« Reply #2 on: May 29, 2007, 05:28:56 pm »

brendan, please go to your profile and change your alias to your real full name as required by the posting rules clearly displayed at the top of the page.

Pages: [1]   Go Up

Page created in 0.045 seconds with 19 queries.