ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 5 6 [7] 8 9 ... 12   Go Down

Author Topic: EONA ADRaudio merged  (Read 86418 times)

Danny Mullins

  • Full Member
  • ***
  • Offline Offline
  • Posts: 193
Re: EONA ADRaudio Powered Loudspeakers
« Reply #60 on: March 21, 2007, 02:17:18 PM »

Do you think it would be possible to demo this setup down here in East Tennessee? I ve got a few different things I would love to check that size rig out on. One is traveleing to Florida in May. Probably looking to buy around the end of this year.
Logged
The offer is "A penny for your thoughts", but we always give "Our two cents worth". Is someone making a profit?

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Re: EONA ADRaudio Powered Loudspeakers
« Reply #61 on: April 03, 2007, 10:48:03 AM »

Too Tall (Curtis H. List) wrote on Fri, 20 October 2006 16:09

Any chance you could share some of these measurements?
A save as of the delay finder after it makes an Impulse Response would be nice.

One up in the air on stands and one down on the ground as a stage monitor would be work.

Curtis,

I was just reading through this thread again and I see I totally failed to follow through on this. My apologies! As I am conveniently in Slovenia, I grabbed my measurement mic and got some basic traces indoors (it was raining) of the 103, U61, and M1225. I've linked to the .wav impulse response files for the U103 and M1225.

U103:
http://www.campuspa.com/images/eonaadraudio/u103.png

M1225:
http://www.campuspa.com/images/eonaadraudio/m1225.png

U61 (new!):
http://www.campuspa.com/images/eonaadraudio/u61.png

http://www.campuspa.com/images/eonaadraudio/u103.wav
http://www.campuspa.com/images/eonaadraudio/m1225.wav
Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes

Caleb Dick

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 851
Re: EONA ADRaudio Powered Loudspeakers
« Reply #62 on: April 03, 2007, 05:30:44 PM »

Bennett,

Will there be a demo rig in the Portland/Seattle oval anytime soon?  I'd like to hear it, but don't really have means to play with it personally at this time.  Even Bend, OR would work.

Caleb
Logged
Caleb Dick
AVE
-----------------
Why waste time with second best

Experience is something you get just after you need it

Phillip_Graham

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1584
Re: EONA ADRaudio Powered Loudspeakers
« Reply #63 on: April 04, 2007, 05:42:54 PM »

Hey Bennett,

Did you take those responses in the ground plane, or in free space?  

The gentle downwards tilt makes me think you must have taken them in ground plane, or is that just the general "x-curve" response you are going for?
Logged

Ales Dravinec 'Alex'

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 727
    • http://www.adraudio.com
Re: EONA ADRaudio Powered Loudspeakers
« Reply #64 on: April 05, 2007, 01:25:46 AM »

Quote:

...Did you take those responses in the ground plane, or in free space...


Phillip!

I hope you don't mind me confirming that.
Ground plane, HF horn closer to ground.

A
Logged
Ales Dravinec
R&D manager, owner
ADRaudio
Slovenia

'There's no replacement for displacement' Carroll Shelby (Jim Bowersox, Tim McCulloch)
'Put speakers up in the air, where they belong' Bill Hanley

Phillip_Graham

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1584
Re: EONA ADRaudio Powered Loudspeakers
« Reply #65 on: April 05, 2007, 02:14:18 PM »

Ales Dravinec 'Alex' wrote on Thu, 05 April 2007 01:25

Quote:

...Did you take those responses in the ground plane, or in free space...


Phillip!

I hope you don't mind me confirming that.
Ground plane, HF horn closer to ground.

A



Did you angle the boxes down to get the on-axis response?

Thanks  Very Happy
Logged

Ales Dravinec 'Alex'

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 727
    • http://www.adraudio.com
Re: EONA ADRaudio Powered Loudspeakers
« Reply #66 on: April 05, 2007, 03:07:05 PM »

Quote:

Did you angle the boxes down to get the on-axis response?Thanks  Very Happy


No. So, to be exact, mic position was from 6 to 7 deg. off axis.

A  Very Happy
Logged
Ales Dravinec
R&D manager, owner
ADRaudio
Slovenia

'There's no replacement for displacement' Carroll Shelby (Jim Bowersox, Tim McCulloch)
'Put speakers up in the air, where they belong' Bill Hanley

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Re: EONA ADRaudio Powered Loudspeakers
« Reply #67 on: April 05, 2007, 03:09:58 PM »

Caleb, I don't have anything heading out your way at the moment, I need to get a rig down into the TN/Florida area first, and then I'd like to run one around the midwest. I'd very much like to get you something, as soon as I can spare some equipment I will.
Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Re: EONA ADRaudio Powered Loudspeakers
« Reply #68 on: April 05, 2007, 03:11:08 PM »

Ales,

Our first set of measurements was on the ground, but then IIRC we moved to a pole for everything but the M1225, and these measurements should be from the pole mounting.
Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes

John Horvath

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1100
    • http://www.alanproaudio.com
Re: EONA ADRaudio Powered Loudspeakers
« Reply #69 on: April 05, 2007, 03:17:14 PM »

Ales Dravinec 'Alex' wrote on Thu, 05 April 2007 00:25

Quote:

...Did you take those responses in the ground plane, or in free space...


Phillip!

I hope you don't mind me confirming that.
Ground plane, HF horn closer to ground.

Interesting.. If this is a true Ground Plane measurement, I wonder why Bennett's Smaart notes state 'pole mounted' and 'on stand'..??  Or were you guessing, Alex? Razz

(Edit: Doh, Bennett replied while I was replying, sorry Alex.)
Logged
-John

Alan Pro Audio
219-769-3600
Pages: 1 ... 5 6 [7] 8 9 ... 12   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.036 seconds with 21 queries.