ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Linking Live camera to Existing TVs for feed  (Read 1823 times)

joe mayhew

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Linking Live camera to Existing TVs for feed
« on: April 03, 2007, 06:48:05 PM »

Hey All...We are having a church service on Easter in a new (already overflowing) bldg - wondering if anyone has had experience or suggestions for hooking up a camera to TVs for remote viewing (live)?

Any power source or signal strengthener required?

Thanks
Logged

E. Lee Dickinson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1523
    • http://www.leedickinson.com
Re: Linking Live camera to Existing TVs for feed
« Reply #1 on: April 06, 2007, 11:42:00 PM »

If the TVs already exist, it will depend on how they're hooked up. Do they have Cable TV available on all of them? If so, you can get an RF Modulator (even from Radio Shack, but there are better ones woth more frequency agility online), and place your camera output onto an unused cable chanel. Tune the TVs to that channel, and you're done.

That would be the easiest way to go about it.
Logged
E. Lee Dickinson
Advanced Visual Production Inc.
sound - lighting - video - design
www.avpric.com
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.032 seconds with 21 queries.