ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: Fiber Question  (Read 4047 times)

Josh Millward

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
  • Meridian, MS
Re: Fiber Question
« Reply #10 on: February 20, 2007, 07:01:20 PM »

Chi Von wrote on Wed, 07 February 2007 08:41

Ok well I found a solution so I decided to post it in case anyone else ever runs into this issue. Its an Opticomm transmitter/receiver that can carry composite video, Balanced audio, and ethernet 10/100 MBPS on a single fiber! I just used there configurator and it it gave me options based on the application.



Since you are looking to transmit stuff point to point using fiber as a medium, I highly recommend Meridian Technologies. They have the ability to move most anything across a fiberoptic link. Check them out here:
http://www.meridian-tech.com/
Logged
Josh Millward
Danley Sound Labs

Mac Kerr

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 10223
Re: Fiber Question
« Reply #11 on: February 20, 2007, 07:12:41 PM »

Josh Millward wrote on Tue, 20 February 2007 19:01

[Since you are looking to transmit stuff point to point using fiber as a medium, I highly recommend Meridian Technologies. They have the ability to move most anything across a fiberoptic link. Check them out here:
http://www.meridian-tech.com/
As does Telecast.

Mac
Logged
Pages: 1 [2]  All   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.027 seconds with 20 queries.