Topic: NL8MPR's - The old round versions? (Read 1905 times)

Dean Riley · « **on:** January 22, 2007, 05:23:56 PM »

I need some NL8MPR. The old round versions. I can buy or trade up with the new ones. I just found out about the version change. I know, where have I been? Last order was for 100, so they lasted for a while. Thanks

Geri O'Neil · « **Reply #1 on:** January 22, 2007, 07:19:03 PM »

So I climb out from under this rock and see someone talking about a different version of the NL8 other than the round one. I have 8 NL8MPRs in a drawer at my home office. What do the new ones look like and do you have 8 of them to trade? If I can use the new ones, you got a deal.

Geri O

Jim Cutshall · « **Reply #2 on:** January 22, 2007, 08:55:25 PM »

The new ones are Square (kind of like my head)....But I believe they fit the old holes, etc

Dean Riley · « **Reply #3 on:** January 22, 2007, 09:13:03 PM »

Geri,
Long ago I was told that the "R" stood for Round. You would think they would drop the letter if so. I ordered 20 from Markertek and this is what I got.

http://www.neutrik.com/content/products/detail.aspx?id=210_8 4921&catId=CatMSDE_audio

All my panels are punched to fit EP or NL8MPR(round). Now when I posted this topic, I thought these wouldn't even cover up the hole on the sides and top. But after doing a little comparison, I see that only a small spot will not get covered.

This is the different size(shape) connectors and the holes punched in my panels.

index.php/fa/7564/0/

Not as bad as I expected. But I would still like to swap with you.

Geri O'Neil · « **Reply #4 on:** January 22, 2007, 10:29:18 PM »

As they say...

"PM sent".

Geri O

ProSoundWeb Community

Author Topic: NL8MPR's - The old round versions? (Read 1905 times)

Dean Riley

NL8MPR's - The old round versions?

Geri O'Neil

Re: NL8MPR's - The old round versions?

Jim Cutshall

Re: NL8MPR's - The old round versions?

Dean Riley

Re: NL8MPR's - The old round versions?

Geri O'Neil

Re: NL8MPR's - The old round versions?