ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: NL8MPR's - The old round versions?  (Read 1521 times)

Dean Riley

  • Full Member
  • ***
  • Offline Offline
  • Posts: 140
NL8MPR's - The old round versions?
« on: January 22, 2007, 05:23:56 pm »

I need some NL8MPR. The old round versions. I can buy or trade up with the new ones. I just found out about the version change. I know, where have I been? Last order was for 100, so they lasted for a while. Thanks

Logged
Dean

"Been there, done that!"

Geri O'Neil

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2413
Re: NL8MPR's - The old round versions?
« Reply #1 on: January 22, 2007, 07:19:03 pm »

So I climb out from under this rock and see someone talking about a different version of the NL8 other than the round one. I have 8 NL8MPRs in a drawer at my home office. What do the new ones look like and do you have 8 of them to trade? If I can use the new ones, you got a deal.

Geri O

Logged
"Stagelite Sound...A Pin 2 hot-compliant company"

Jim Cutshall

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 378
Re: NL8MPR's - The old round versions?
« Reply #2 on: January 22, 2007, 08:55:25 pm »

The new ones are Square (kind of like my head)....But I believe they fit the old holes, etc
Logged

Dean Riley

  • Full Member
  • ***
  • Offline Offline
  • Posts: 140
Re: NL8MPR's - The old round versions?
« Reply #3 on: January 22, 2007, 09:13:03 pm »

Geri,
 Long ago I was told that the "R" stood for Round. You would think they would drop the letter if so. I ordered 20 from Markertek and this is what I got.

http://www.neutrik.com/content/products/detail.aspx?id=210_8 4921&catId=CatMSDE_audio

All my panels are punched to fit EP or NL8MPR(round). Now when I posted this topic, I thought these wouldn't even cover up the hole on the sides and top. But after doing a little comparison, I see that only a small spot will not get covered.

This is the different size(shape) connectors and the holes punched in my panels.

index.php/fa/7564/0/

Not as bad as I expected. But I would still like to swap with you.
Logged
Dean

"Been there, done that!"

Geri O'Neil

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2413
Re: NL8MPR's - The old round versions?
« Reply #4 on: January 22, 2007, 10:29:18 pm »

As they say...

"PM sent".

Geri O
Logged
"Stagelite Sound...A Pin 2 hot-compliant company"
Pages: [1]   Go Up
 

Page created in 0.027 seconds with 21 queries.