The kind folks over at A&H sent me a GL2800 to play with for awhile, and Im sure a lot of you guys are itching to hear about the board.
For you folks who live under a rock, the gl2800 packs some of the following features:
-8 busses
-10 aux
-4 mute groups
-2 mid sweeps
-phantom power on every channel
-pad's on every channel
-Polarity swap on every channel
-dual function(mon/FOH)
-Inserts on the group outs
The full feature set can be found
Here.In use:
The first gig was a learning experience. I used it for a school's battle of the bands. It took a little while to get used to. Im used to the meters on each channel being off to the right of the fader, however on this board they are on the left side. Took a little while to get used to. The EQ also took some getting used to. It sounds great, but has a very narrow Q. I found myself using less eq then normal, but at the same time I was using completely different frequencies then normal. Normally I boost 3k on the kick channel, but I found myself boosting 1k with the A&H. But, I must say I really like how the board sounded. It's very clean and transparent. I pushed it hard(up to clipping) and really didnt hear any distortion. The mute groups are also nice. Instead of going through the trouble of hitting the mute button on each channel, I can just hit the mute group and be done with it. 10 auxes is also nice. You can switch the first 8 pre/post in groups of 4, and you get 1 stereo aux(9-10). You can run 4 monitor mixes, 4 efx, aux subs and still have another stereo aux left! Now thats what Im talking about.
However, there are a few things I didnt like so much. They did a great job with packing a ton of features into a small space, but thats the problem. Too much stuff too close together. The knobs are a little close together, and someone with fatter fingers might have problems with bumping into other knobs. Also, the routing buttons on the channel strips are a pain. There are a ton of buttons real close together. Ive hit into them a few times and rerouted things... Woops... Oh well. One last thing that I would have liked is LED's to let you know whether the phantom power is on or off. But, I can live without that.
Also, another thing Ive noticed with all A&H's is slower meters. Ive never quite got the concept of that. On my Peavey board the meters are very quick, but with any A&H I've mixed on the meters are a lot slower. Whats the reasoning behind that?
One of the A&H's new competitors is the Mackie onyx boards. Ive been mixing on the onyx's for some time now and really like their sound. The A&H sounds completely different though. I thought the Mackie would give the A&H a run for it's money, but there is no competition. The Mackie has a more middy sound to it, while the A&H has no "sound" to it. I like the EQ on the A&H a lot more and I like the feel of the A&H board. Mackie's sweeps dont go below 100hz, A&H goes to 35hz. You just cant beat that! The Mackie is also a lot larger and heavier then the A&H. The 32 channel gl2800 is just over 4' long, less then 2' deep and only around 100lbs. The Mackie is over a foot longer and deeper too. It also weighs around 10lbs more. I'd pick the A&H board over a Mackie any day, though Mackie has really improved.
So, to sum it up:
Pros:
-Compact: 1 person can move a 32 channel frame with no problems
-Sounds great
-Looks cool
-Lots of Auxes
Cons:
-Knobs too close together
-Routing buttons bunched up with no indication of on or off
I also would have liked an internal psu. The external one is a pain to haul around.
And how about some pictures:
From the LAB show.
First gig with it. Tom Mixing.
Ill post some more pics after my gig with it this weekend.
Evan