ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 4 5 [6]   Go Down

Author Topic: Sabine Navigator NAV4800 System Processor  (Read 49975 times)

Don Lanier

  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
    • http://www.pearlproaudio.com
Re: Sabine Navigator NAV4800 System Processor
« Reply #50 on: January 05, 2008, 02:11:26 AM »

Unless I misread it said earlier that your offering presets for different manufacturer's, which brands are you including and do you have any Peavey Versarray presets, I like your Navigator software and have been playing with it for a few days, I always intended to have this type of PC control for my system and actually bought a Laptop and tablet just for this use, Both HP, I also use the USB to Serial converter for my Current Digitool Crossover system, But I may consider a change. The 4800 Looks like a very nice DSP, Would love to use one for a couple weeks.
Logged
Don Lanier
Pearl Productions
http://www.pearlproaudio.com

Don Lanier

  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
    • http://www.pearlproaudio.com
Re: Sabine Navigator NAV4800 System Processor
« Reply #51 on: January 05, 2008, 02:18:07 AM »

For some of you having issues with the USB to Serial converter I use a Cables to Go, Brand I had to reload the Driver once but since then its worked perfectly. Making sure the driver is loaded correctly makes all the difference, there driver is actually online on the same page as the converter so no CD to deal with.

http://www.cablestogo.com/product.asp?cat%5Fid=1529&sku= 26886

Click on the product manual for the Driver and Manual

Logged
Don Lanier
Pearl Productions
http://www.pearlproaudio.com

Don Boomer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1034
Re: Sabine Navigator NAV4800 System Processor
« Reply #52 on: January 08, 2008, 05:57:15 PM »

Hey Don ...

We don't supply any presets (yet) but you should be able to easily insert the Peavey VSX or Digitool numbers directly into  the Navigators since the filters are calculated the same way ... and you can do it in real time since the GUI works "live" Very Happy
Logged
Don Boomer
Wireless Sales Engineer
Line 6, inc.

kevinnemrava

  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
Re: Sabine Navigator NAV4800 System Processor
« Reply #53 on: January 15, 2008, 08:38:01 PM »

Don Boomer wrote on Tue, 08 January 2008 22:57

Hey Don ...

We don't supply any presets (yet) but you should be able to easily insert the Peavey VSX or Digitool numbers directly into  the Navigators since the filters are calculated the same way ... and you can do it in real time since the GUI works "live" Very Happy

... easy there don..... :):)Smile


LOL

Hey isn't there some rule about each member is only allowed 1 product in road testing Smile

PS we are thinking of getting the Peavey array, now that yorkville system is out, and the price point is appeantly to high for us.
- to bad your not still there, I was going to see if you could pull some strings for us.


Kev.
Logged
Pages: 1 ... 4 5 [6]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.027 seconds with 18 queries.