ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All   Go Down

Author Topic: Wedge-Fest '06, September 9-10  (Read 19076 times)

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Wedge-Fest '06, September 9-10
« on: July 26, 2006, 12:05:34 am »

Come one, come all, to the 2006 Monitor Wedge Listen Fest in beautiful Troy, NY. Join your fellow LABsters in two days of pure audio bliss as we beat the snot out of a whole slew of excellent wedges.

It's official, the dates are:
Saturday, September 9th from 10:00 a.m. until whenever and
Sunday, September 10th from 1:00 p.m. until everyone leaves.

The location is John Chiara's club, Revolution Hall, at 425 River Street in Troy, NY 12180. There is readily available parking nearby. The club is 600 capacity with a large stage and a Danley installed system with SH-50s & TH-115s for the main floor, plus SH-100s for the balcony. That should be plenty of reason to come, even if my smiling face isn't impetus enough. Several attendees are also bringing instruments, so bring yours and you can hear how the wedges hold up under fire!

There will be plenty to eat and drink, food will be provided by the fine folks at Huge Universe. There will be all sorts of beer as well, there's 14 taps in the club, also on the house.

Please come expecting to take something home... there will be giveaways from a few cable and connector manufacturers, T-Shirts from LOUD, and any other swag I can snag. There will also be wedges that I don't want to keep and that need to be used on shows after the event, so come in a large vehicle and take something home to try out. We'll take care of the details, we just need people to write up road tests on these boxes at no cost to themselves.

Due to suggestions by many people, I'm going to pare down the number of wedges that will be at the Listen Fest to make sure we can give each one enough time. The following wedges will definitely be there, plus one or two others at the most:
  • Community M12
  • FBT Something (PSR 212M?)
  • Adamson Something
  • ADR Audio M1225
  • Radian Microwedge 12"
  • EV XW15A
  • Assistance Audio 12" Coax

I'm going to have to ask that nobody else bring a wedge unless they've already been asked to (PM me if you're unsure). Mark has promised me I can do another one of these at some point in the not too distant future, and we'll try and cover more wedges of interest at that point. I wish there was enough time to get every wedge in the industry into one room, but that would be unrealistic and do nobody a service. Hopefully this first event will tell me enough about what to do in the future that we can have an even better one the second go around, and this way every wedge should get a fair trial.

Please feel free to call or email with any questions, (518) 488-7190 and bennett@campuspa.com. I also respond to PMs. If you need to be picked up from a train or a plane, that can be arranged. If you need a place to stay or a good local hotel, we can probably work something out.

Sorry there was a little bit of lag there, I've been very busy. Most of the pieces are now in place. Hope to see you there!
Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes

Michael 'Bink' Knowles

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4279
    • http://www.binkster.net/index.shtml
Re: Wedge-Fest '06, September 9-10
« Reply #1 on: July 26, 2006, 01:34:10 am »

Quote:

...I'm going to pare down the number of wedges that will be at the Listen Fest to make sure we can give each one enough time...


A hard decision but the right one. Good going!

Have fun Festing! I'll be doing a very boring gig in Boston instead... hatin' it.  Confused

Cheers, Big Ears!

-Bink
Logged
Michael 'Bink' Knowles
www.binkster.net

Mac Kerr

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 10223
Re: Wedge-Fest '06, September 9-10
« Reply #2 on: July 26, 2006, 09:39:09 am »

Bennett, I think you should include one of the standards that everyone uses as a yardstick, either a Clair 12AM, or a Firehouse F12. Also with all the discussion about powered wedges it would be nice to include that UM-1P.

Mac
Logged

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Re: Wedge-Fest '06, September 9-10
« Reply #3 on: July 26, 2006, 11:51:45 am »

Mac, I'd be OK with a "reference wedge" as long as it was understood that it wasn't there to be evaluated like the others... I don't want to make poor Firehouse send me a road case and a pair of wedges for a show when we're just using their wedge as a yardstick. If you want to haul up a Meyer box that would be OK... I think that the properties of each wedge will be readily apparent with or without a solid reference, and that sort of thing is notoriously hard to calibrate as well.
Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes

John Chiara

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2186
Re: Wedge-Fest '06, September 9-10
« Reply #4 on: July 28, 2006, 09:29:47 pm »

Bennett,
This is the Sat-Sun dates ...correct? Please everyone be advised of the Sunday schedule..I'll let Bennett flesh it out.
Looking forward to a great listening. I also have a 6 piece drum kit here that we can use for any playing...I also have 2 2x12 guitar cabs and one Ampeg tube amp...and mics and cables. It would be great for some ggod playing to be happening as well as listening.


John
Logged
"mix is a verb, not a noun" Sooo, as Aunt Bea would say.."Get to it!!!"

John A. Chiara aka. Blind Johnny
Albany Audio Associates Inc.
Troy, NY
518-961-0069 - cell

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Re: Wedge-Fest '06, September 9-10
« Reply #5 on: July 29, 2006, 10:08:01 am »

Hey John,

I've got Sunday scheduled from 1:00 on. I figured better a half day than a Friday when even I'll probably be busy.
Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes

John Chiara

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2186
Re: Wedge-Fest '06, September 9-10
« Reply #6 on: July 29, 2006, 12:13:28 pm »

Bennett Prescott wrote on Sat, 29 July 2006 10:08

Hey John,

I've got Sunday scheduled from 1:00 on. I figured better a half day than a Friday when even I'll probably be busy.


Great..
John
Logged
"mix is a verb, not a noun" Sooo, as Aunt Bea would say.."Get to it!!!"

John A. Chiara aka. Blind Johnny
Albany Audio Associates Inc.
Troy, NY
518-961-0069 - cell

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Re: Wedge-Fest '06, September 9-10
« Reply #7 on: August 31, 2006, 12:34:31 pm »

Several people have asked me about lodging. Here's a link to what RPI recommends, and they're right up the hill, so any of the options in Troy are within a quick walk and any of the other options are within a quick drive.

http://admissions.rpi.edu/update.do?artcenterkey=37&seta ppvar=page(1)
Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes

Paul Bell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
    • http://pbellsound.com/
Re: Wedge-Fest '06, September 9-10
« Reply #8 on: September 01, 2006, 06:02:12 am »

Hey Bennett,

I had been planning on attending both days of the wedge fest. I am coming up with a McCauley SM72 and had made arrangements for McCauley to drop ship to the club their 3 way SM950. Last month I checked with you via email about this and your available electronics packages. Is it still OK to provide these monitors?

Best,

Paul Bell
Logged
Paul Bell
PBell Sound New York City
paulATpbellsound.com
User/provider for:
McCauley, BASSMAXX, APB DynaSonics, QSC, Ashly, DBX, Rane Digital, Rapco, Faital Pro

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Re: Wedge-Fest '06, September 9-10
« Reply #9 on: September 01, 2006, 09:32:49 am »

Hey Paul,

I'll have Ashly, Camco, Crest, and QSC amps at my disposal. I'll also have Xilica and dbx DSP, and hopefully the Dolby Lake processor. It's still cool for you to bring those wedges since you checked with me, although I want to chew through the wedges that manufacturers have sent me specifically for road test first, since I owe them one.

Paul Bell wrote on Fri, 01 September 2006 06:02

I had been planning on attending both days of the wedge fest. I am coming up with a McCauley SM72 and had made arrangements for McCauley to drop ship to the club their 3 way SM950. Last month I checked with you via email about this and your available electronics packages. Is it still OK to provide these monitors?

Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes
Pages: [1] 2  All   Go Up
 

Page created in 0.046 seconds with 16 queries.