ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: WOO BROKE A LEAD!  (Read 4476 times)

jeffhtg (Jeff Kenney)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1019
WOO BROKE A LEAD!
« on: July 20, 2006, 12:56:50 am »

well. its been about 2 years and 7 months since the monstrosity of 8 labs powers up in my venue. I had 1 failure immediatley that was warrantied.. and today when we pulled the boxes for a checkup and to put "anti wire cinch" bumpers behind the cabinets, we found a driver missing a lead.

Oddly enuff the broken lead was on one of the lower powered cabinets (qsc rmx4050HD vs. the vz5000 boxes).. anyways.. anyone else break leads yet Razz

?


Logged

Antone Atmarama Bajor

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 851
    • http://www.geocities.com/somesoundgreat
Re: WOO BROKE A LEAD!
« Reply #1 on: July 21, 2006, 03:09:43 pm »

     I haven't Broken a lead but I have yanked a lead out of its crimp connector (It happened when I accidentally sent a clipped sine wave into a sealed Lab Sub Cab I built).

    I decided to solder it to the clip,  You have to be careful though since the solder wicking can cause the lead to become inflexible.

Antone-
Logged
Pages: [1]   Go Up
 

Page created in 0.037 seconds with 21 queries.