ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Converting Cabinets for Bi-Amp operation.  (Read 1643 times)

Mike Slay

  • Full Member
  • ***
  • Offline Offline
  • Posts: 233
Converting Cabinets for Bi-Amp operation.
« on: June 16, 2006, 06:38:08 PM »
A friend and I are looking at converting some EAW FR 253's for Bi-Amp operation.  The trick is to feed the low mid directly and try to use the existing xover for the two 6.5's and the horn.  Is this a totally dumb idea or what?
Logged
What's the difference between a Monitor engineer and FOH engineer?  Monitor engineers can do both.

Duane Massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2189
    • http://www.ozknozz.com
Re: Converting Cabinets for Bi-Amp operation.
« Reply #1 on: June 18, 2006, 01:52:00 AM »
Not dumb, and not difficult.
Logged
Duane Massey
Houston, Texas, USA

ProSoundWeb Community

Re: Converting Cabinets for Bi-Amp operation.
« Reply #1 on: June 18, 2006, 01:52:00 AM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.033 seconds with 25 queries.