ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: 1 in/1 out ~ 1 in/3 out DMX Opto-Isolators; what are you liking?  (Read 1525 times)

Ron Hebbard

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 287

Hello;

The title pretty much asks my question.

I'm aware of the 1 in/1 out products from GAM and Doug Fleenor as well as the modules from a company near Atlanta.  I'm also aware of Gray Interface / Pathways Connect, Louella Enterprises and Johnson.
What others am I missing?  What one is your personal favourite?
Basically looking for a small, affordable, problem solver / test device to live next to my Goddard Mini.

Toodleoo!
Ron Hebbard
Logged

Jordan P.C. O'Neil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
Re: 1 in/1 out ~ 1 in/3 out DMX Opto-Isolators; what are you liking?
« Reply #1 on: May 31, 2006, 10:10:11 pm »

Somewhere on this forum are posted basic scematics for opto-isolators. I used these to build a bunch of 1 in 2 outs which have been great. If you're slightly electronically inclined, they are very easy to construct.
Logged

Dan Kok

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 338
Re: 1 in/1 out ~ 1 in/3 out DMX Opto-Isolators; what are you liking?
« Reply #2 on: June 04, 2006, 08:46:16 pm »

I have this one:
http://www.dfd.com/125e.html
from Doug Fleenor Designs.  It was around $1,100 but has solved all my flaky control problems.

--
Dan
Logged

jeffhtg (Jeff Kenney)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1019
Re: 1 in/1 out ~ 1 in/3 out DMX Opto-Isolators; what are you liking?
« Reply #3 on: June 12, 2006, 12:32:23 am »

I use the Technilux Opti-Iso  its 1 in with passthru and 4 out.. all inputs and outputs are in 3 pin and 5 pin. Plus its a VERY cost effective unit - a must for every install!
Logged

Duane Massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2189
    • http://www.ozknozz.com
Re: 1 in/1 out ~ 1 in/3 out DMX Opto-Isolators; what are you liking?
« Reply #4 on: June 13, 2006, 12:59:06 am »

I've used Fleenor, Martin, and ADJ/Elation, with no issues with any of them. Period. I haven't used any DMX merge devices, however.
Logged
Duane Massey
Houston, Texas, USA
Pages: [1]   Go Up
 

Page created in 0.03 seconds with 19 queries.