ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All   Go Down

Author Topic: Hornresp 80Hz Candidate  (Read 8507 times)

Stephen Kramer

  • Full Member
  • ***
  • Offline Offline
  • Posts: 100
Re: Hornresp 80Hz Candidate
« Reply #20 on: April 16, 2007, 09:40:21 pm »

Hello, I've come across a pair of these and would appreciate some professional help on designing the cabs for them.

http://www.users.uswest.net/~ddshorns/dvb15n.htm

sorry to bump an old post, but I came across this on a search:
Quote:

Hello Antone,
The DVB-15N horn flare only offers pattern control to 190hz and will provide loading to the specified 80hz only in a properly designed ported enclosure. There is a compresion factor introduced to the cone and not all 15" speakers are up to the task.
The specifications may seem confusing in that regard, they were published by the original founder of the company Robert Rice and may need to be re-evaluated/clarified. DDS recently relocated into a larger facility and is phasing out direct sales to contractors in general due to pressure from OEM clients.

-Tracy Sherwood, Primary, DDS LLC.


Any info on the cab specs and drivers to achieve these specs would be of great help.

Thanks,
Steve
Logged
Pages: 1 2 [3]  All   Go Up
 

Page created in 0.043 seconds with 19 queries.