ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: 'Invisible' Screen join lines  (Read 4626 times)

Sheldon Gooi

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
'Invisible' Screen join lines
« on: February 17, 2011, 02:41:30 AM »

Hi,

anyone has this problem on larger screens? I am using a Draper FastFold type screen, 10.5'x14', and there is a 'heat weld' across the screen, where they join the fabric for a larger size.
Usually not a problem, but when a client notices it, they usually go ballistic, and go on and on about that line ruining the image for their event. Especially when the slides are predominantly white. I've had the same problem with larger AVStumpfl screens, which they claim are 'Seamless Optic'.
anyone have solutions or workarounds for this? Any particular brands do this better?
Just wanna see how you guys manage this problem.

sheldon
Logged

Brad Weber

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2208
  • Marietta, GA
Re: 'Invisible' Screen join lines
« Reply #1 on: February 17, 2011, 07:10:51 AM »

I have run into that, in particular with a perforated 'acoustically transparent' screen that was obviously perforated prior to being seamed since the perforations did not line up at the seam and created a band that was solid rather than acoustically transparent.  I have found that Stewart Filmscreen can often do larger seamless screen sizes than most others.
Logged

Lee Douglas

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 685
  • 47.662615, -116.756954
Re: 'Invisible' Screen join lines
« Reply #2 on: February 17, 2011, 09:26:40 PM »

+1 for Stewart.
Logged
This space for rent

ProSoundWeb Community

Re: 'Invisible' Screen join lines
« Reply #2 on: February 17, 2011, 09:26:40 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.023 seconds with 25 queries.