ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All   Go Down

Author Topic: Need drivers  (Read 5240 times)

Jeff Carney

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Re: Need drivers
« Reply #20 on: April 01, 2006, 03:33:44 pm »

Will got up and re-cut the baffle board for the 18s. I also cut a 4" by 16.75" slot with 4" sides and a center decider, it works out to be two 4x8x4 ports. I can add to the front and/or the back of the ports if they need to be longer.

The baffle board ID is 46.75 x 24.4, the rear board ID is 46.75 x 16.5, and the side walls are 29.5.

Pages: 1 2 [3]  All   Go Up

Page created in 0.023 seconds with 19 queries.