Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > LAB Lounge

Slanted Rack for LS9-16

(1/2) > >>

Derek Van Winkle:
What slanted rack is available for the LS9-16?

I'm looking for something with about 10-12U underneath for racking up wireless mics and other equipment.

Thanks,

Luke Robinson:
I used the oddessy, it works great but I had to do some modifications. You will need to lower the top set of rack rails so that the lid will close over the tilted screen of the ls9. This also involves chopping about an inch off the top of the front ralis to accommodate.
It took me less than an hour to do the whole lot of it.

Bob Leonard:
Road Ready offers some high quality racks just for this purpose. Years ago I turned to Riad Ready and have been happy ever since. Not the cheapest, not the most expensive, but amoung the best.

michael glenn:
I bought a C4UE-P-22 from EWI cases

Perfect for me, medium duty, good quality plus I'm a fan of EWI Cases.  The right size too,  my LS9-16 doesn't hang over the front rack rails.  4 rack spaces below or you can get a variant with 6 rack spaces.

http://www.audiopile.net/products/Cases/CU_series_roadracks/CU-P-22/CU-P-22_series_cutsheet.shtml

Doug Fowler:

--- Quote from: michael glenn on February 19, 2011, 03:50:25 PM ---I bought a C4UE-P-22 from EWI cases

Perfect for me, medium duty, good quality plus I'm a fan of EWI Cases.  The right size too,  my LS9-16 doesn't hang over the front rack rails.  4 rack spaces below or you can get a variant with 6 rack spaces.

http://www.audiopile.net/products/Cases/CU_series_roadracks/CU-P-22/CU-P-22_series_cutsheet.shtml

--- End quote ---

But can you apply the lid with XLRs patched into the LS-9?

I bought a couple of these a couple of years ago, and that is my only issue for LS-9 use.

BTW I think right angle XLRs solves it.

Navigation

[0] Message Index

[#] Next page