Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Audio Measurement and Testing

Confused about SMAART

<< < (3/3)

Timo Beckman:
1. I use the manufacturers'recommended crossover points and bandpass delay settings.

I verify the settings from the manufacturer if possible . On my BLOG there is a article about 2 brands where with settings mismatch .

http://timobeckmangeluid.wordpress.com/2011/10/02/tanstaafl-there-aintno-such-thing-as-a-free-lunch-statement-i-got-from-b-mccarthy/

The sls measurement had a polarity problem with standard settings from the manufacturer . The second had a delay mismatch between the high and low driver within the top .

If you really want to learn about how to analyze the data on screen measuring a sound system read the book by Bob McCarthy or the blue book from meyersound .

Jay Barracato:

--- Quote from: Timo Beckman on November 03, 2011, 01:43:40 PM ---1. I use the manufacturers'recommended crossover points and bandpass delay settings.

I verify the settings from the manufacturer if possible . On my BLOG there is a article about 2 brands where with settings mismatch .

http://timobeckmangeluid.wordpress.com/2011/10/02/tanstaafl-there-aintno-such-thing-as-a-free-lunch-statement-i-got-from-b-mccarthy/

The sls measurement had a polarity problem with standard settings from the manufacturer . The second had a delay mismatch between the high and low driver within the top .

If you really want to learn about how to analyze the data on screen measuring a sound system read the book by Bob McCarthy or the blue book from meyersound .

--- End quote ---

zombies from 2006

Navigation

[0] Message Index

[*] Previous page

Go to full version