Topic: Fork Size (Read 2131 times)

Phil LaDue · « **on:** January 19, 2006, 12:12:59 PM »

How do I figure out the inside diameter of these forks? The stud size is #8.
I need the forks for connecting up QSC PLX series amps which take forks with an inside diameter of 0.25"(6.3mm) and a total width of 0.51"(12.9mm)
http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7& Partnumber=095-230

If these are not the right ones are any of the others on this page the correct size?
http://www.partsexpress.com/webpage.cfm?&DID=7&WebPa ge_ID=3&ObjectGroup_ID=401&sm=1&so=2

Sorry if I am being annoying.

Phil LaDue · « **Reply #1 on:** January 20, 2006, 04:25:16 PM »

I need to submit the purchase documents in one week, please help!!

Rob Timmerman · « **Reply #2 on:** January 20, 2006, 10:09:09 PM »

I believe that the stud size is the same as size as the equivalent machine screw, so the spade terminals that are sized for a #8 stud will not fit on a 1/4" post. You need 1/4" spade terminals. Don't know where to get them though, as neither Parts Express nor Digikey seem to sell them

ProSoundWeb Community

Author Topic: Fork Size (Read 2131 times)

Phil LaDue

Fork Size

Phil LaDue

Re: Fork Size

Rob Timmerman

Re: Fork Size