ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: PM5D Grounding  (Read 891 times)


  • Newbie
  • *
  • Offline Offline
  • Posts: 1
PM5D Grounding
« on: January 09, 2006, 11:30:24 AM »

Can anybody explain the grounding scheme inside a PM5D?  The ins and outs are both lifted.  I've had hum issues while using a lifted fanout. Dead quiet with a straight fan, but what to do when FOH and Monitor Consoles are both 5Ds? Ideas?

Dave Stevens

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1983
Re: PM5D Grounding
« Reply #1 on: January 09, 2006, 04:02:48 PM »

The issue isn't so much the surface's internal topology as is how the rest of the interface is configured.  We've used both hardwire and active splits numerous times with a pair and have no issues with mic splitting. Every now and again if we are doing gigs with local stacks there can be some noise issues, but that's typically due to the config of local system.  If anything the PM5Ds are some of the quietest consoles I've used.

Are you at one of the shows in town?

Revenge of the Chick Car...
A Barking Dog Goes Road Racing in 2011

ProSoundWeb Community

Re: PM5D Grounding
« Reply #1 on: January 09, 2006, 04:02:48 PM »

Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 17 queries.