Dick Rees wrote on Mon, 25 October 2010 20:24 |
I purchased the four drawer work box. The original caster board placed the front wheels under the case itself, slightly abaft of the door. This led to tipping with more than one drawer out, so I made a new board with the front casters as far forward as possible without obtruding. This fixed the problem completely. I phoned in to M & L with my report and at the time they indicated that a design change was already in the works. I don't know if it has been implemented, but the DIY caster-board swap took all of about half an hour.
|
I think this fix has been made. I bought a pair of the work boxes 6-9 months ago and the caster board sticks out beyond the front of the drawers by 2-3". It looks like the pictures on the web site have been updated to show this also. Of course with the longer caster board the bottom drawer some times catches on the edge of the caster board.
Also +1 on needing heavier drawer closed detents.
Despite these quibbles I still really like the Audiopile products and am even considering a third work box.