ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: A&H DR 66 opinions? better to go with a driverack?  (Read 1601 times)

Randy Pence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1339
A&H DR 66 opinions? better to go with a driverack?
« on: January 06, 2006, 09:27:32 am »

For this bar/lounge a friend is opening I'm researching available digital matrix mixers.  There will be a mobile dj booth for 3 rooms.  A fourth room is intended to be a small film screening room, but that will likely be considered separate.  It could be that the potential sources are mixed at the dj booth, regardless of dj present and the dj mixer output just plugs into wall plates.

The budget is not high (9,000
Logged

Carey Davies

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 465
    • http://www.allen-heath.com
Re: A&H DR 66 opinions? better to go with a driverack?
« Reply #1 on: January 06, 2006, 11:19:36 am »

Randy Pence wrote on Fri, 06 January 2006 14:27

Is anyone familiar with A&Hs software with regards to parametric filters per channel?  


You can download the DR software and run it off line on a PC. That should show you what it can do. If you have any specific questions feel free to post here or PM me.

Note that A&H also produce the newer generation iDR-4 matrix mix processor.
Regards,
Carey (A&H)

Download the software http://www.allen-heath.com/DisplayProduct.asp?pview=30

Learn more about DR66 http://www.allen-heath.com/US/DisplayProduct.asp?pview=22

Learn more about iDR-4 http://www.idrseries.com/
Logged
Pages: [1]   Go Up
 

Page created in 0.033 seconds with 22 queries.