Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Ted Christensen]

I have some gigs coming up and i want to get the delay set right on the tops.

Its bassicly a 2 way system and i want to delay just the tops. I crossover at 96Hz. I need to find tunings but i dont know where to start and i figured checking on here would be better than waiting a few days to find out from EV and JBL.

Once i do get the tunings for the two do i subtract them and the difernce is what i add in delay?


Im using a Behringer DCX2496, Someone told me it would be around 2ms for delay but i want to get it down to the bone.

Thanks.

Happy Holidays  

-Ted

[Mike Pyle]

This method works well:

http://srforums.prosoundweb.com/index.php/m/65250/449/?SQ=c3 df017566c7d68d89c98bf5b842f3cb

If you are using a DRPA I don't know if it has a polarity switch on the outputs, so you may have to rig up a way to switch polarity to either the sub or top.

[Ted Christensen]

Thanks. Yah the DCX does have a phase switch..i think you can slecet any amount you want..I would use 180 correct?

[Ivan Beaver]

You can just hit the "Inverted polarity" button on the short delay page.