Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Pro AV FUD Forum Archive

Broad Spectrum Graphics Insertion

(1/2) > >>

Brian K Tennyson, CTS-D:
Broad Spectrum Graphics Insertion

I am looking for a graphics insertion device that will insert the same crawling banner or logo on all channels of a television distribution system simultaneously.

Any takers?

Andy Spalla:
All channels is tough. For the local access channel I run, we use the Aavelin MagicBox. It's nice. I suppose you buy a ton of these and insert them on each channel, but that would seem real expensive.

Ken Freeman:
Try this:

http://www.infocomm.org/index.cfm?oID=9042F99D-1158-46EA-8E0 79DA3E5F4E6CE

It is a Chyron piece designed for emergency inserts.

Ken

Brian K Tennyson, CTS-D:
Thanks, but it appears that it works like the ChyTV system which means you have to put a unit at each TV. My be practical for smaller systems but not for a large deployment.

Ken Freeman:
If I understand this correctly, this would go into master control and would go into the modulators prior to hitting the amp.  You would need one per channel, not one per TV.

Ken

Navigation

[0] Message Index

[#] Next page