ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Par Can Question  (Read 1234 times)

Eric Wards

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Par Can Question
« on: September 11, 2005, 05:18:43 pm »

I have a question about par 56 cans and various bulbs . . . I bought 4 par 56 cans with Medium flood bulbs . . . the Medium spread angle is 30 degrees . . . if I get the Wide flood bulbs at 45 degrees, would I notice that much of the 45 degrees since the bulbs sit back in the can so far ?   or should I stick to Medium floods ?  Would there even be a noticeable difference in the bulbs with the Narrow angle ?

Thanx
Logged

Dan Brown

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1450
    • http://www.reachcomm.net
Re: Par Can Question
« Reply #1 on: September 11, 2005, 05:42:49 pm »

Yes, there would be a very noticable difference.

Remember also par bulbs have a oblong shape. FYI

sincerely,
db
Logged

Eric Wards

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: Par Can Question
« Reply #2 on: September 11, 2005, 05:56:14 pm »

Very cool . . . I was worried since the bulbs sat back about 6 inches from the gel, that it would limit the angle and not get a very good "flood" effect  Rolling Eyes

Thanx again
Logged
Pages: [1]   Go Up
 

Page created in 0.062 seconds with 21 queries.