ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: lab subs at burningman and help with placement  (Read 1424 times)


  • Newbie
  • *
  • Offline Offline
  • Posts: 3
lab subs at burningman and help with placement
« on: September 10, 2005, 08:49:31 am »

we brought 6 v-2 lab subs stacked 3 high and 20 feet apart powered with 3 qsc plx 3402s. we ran 2 yorkville u215s a side and stacked them on top of the labs putting the tops of the yorkvilles like 11 feet off the ground they sounded way better this way but we ran into a little trouble with the labs and big dead spots on the dance floor we are now looking into flying the yorkies and running the labs in a center cluster anny help on ideas on flying thees fore not tons of money would be very cool.hope im on the right track . be well jesse bruce jagged sound boulder co

Tom Manchester

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3034
Re: lab subs at burningman and help with placement
« Reply #1 on: September 11, 2005, 12:30:57 pm »

well instead of flying which requires alot of safety rigging and such, how about just renting or buying some small construction scaffolding and putting the yorkvilles on top of it, and your amps underneath. Get some tarps or cloth and put it around the bottom to make it look nice.
Electro Sound Systems
Pages: [1]   Go Up

Page created in 0.042 seconds with 19 queries.