ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 3 [4]   Go Down

Author Topic: LAB_V1_&_V3 excursion tests  (Read 13465 times)

Tamas Tako

  • Full Member
  • ***
  • Offline Offline
  • Posts: 226
Re: LAB_V1_&_V3 excursion tests
« Reply #30 on: July 08, 2005, 09:23:54 AM »

Hi Walt,

Could you send me screenshots like all modelling parameter, SPL vs Frequency and Xcursion vs Frequency plots made with AJhorn for 4 cabinets on the floor?
It would be very interresting for me....

Thanks,

Tamas
Logged

Walt de Jong

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
Re: LAB_V1_&_V3 excursion tests
« Reply #31 on: July 08, 2005, 09:31:05 AM »

Here is a pic:

http://img24.imageshack.us/img24/3108/tt4dy.jpg

The modelling of the frontchamber is critical. If you use a large value excursion at 30Hz goes up. I think the horns starts right in between the two drivers so I used a small volume of 6 litres in my simulation. If I use 24 litres I also get around 15-16mm.

Best regards,

Walt
Logged

Wayne Parham

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 302
Re: LAB_V1_&_V3 excursion tests
« Reply #32 on: July 09, 2005, 06:24:15 PM »

I think in the case of your V3 horn and my 12 Pi horn, increased excursion is related to their increased bass output.
Logged
Wayne Parham
π Speakers
PiSpeakers.com

Wayne Parham

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 302
Re: LAB_V1_&_V3 excursion tests
« Reply #33 on: July 18, 2005, 09:57:08 AM »


Excellent data, Tamas, thanks!

Logged
Wayne Parham
π Speakers
PiSpeakers.com

Pages: 1 2 3 [4]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.025 seconds with 21 queries.