ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Speaker Re-design  (Read 1872 times)


  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Speaker Re-design
« on: July 05, 2005, 07:37:26 am »

I am thinking about re designing my back firing Martin W Bins, Into front firing bass bins.

Is there a general rule for the loss of SPL and efficiency from going from one design to the next??
Logged See us in action

Geri O'Neil

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2413
Re: Speaker Re-design
« Reply #1 on: July 06, 2005, 04:44:20 pm »

The general rule here that you're looking at a colossal pain in the ass by hacking into an existing box. I always heard that this particular box worked really well, so you'll need to justify (to yourself) the extent of work that you're facing. And if you decided that your life will be better with front-loaded boxes, you'll almost certainly come out better just buying a set of front-loaded boxes, unless you have a LOT of time on your hands.

Just my thoughts,

Geri "been there, done that, still have the scar" O
"Stagelite Sound...A Pin 2 hot-compliant company"
Pages: [1]   Go Up

Page created in 0.04 seconds with 18 queries.