ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Update Confetti Effect  (Read 1247 times)

Bonnie Lackey

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 369
    • http://www.LackeySound.com
Update Confetti Effect
« on: June 01, 2005, 09:45:03 pm »

Had a customer that wanted us to project multiple confetti affects on two walls - each wall is 100'x 21'.  Solution - put a gobo in our MAC500s or Active scans, let the color wheel go and ... Ran into a little problem.  The required colors for the confetti affect were Rosco warm peach, jazz purple, leaf green and two shades of blue.

With the help of my friendly competitors, PNTA (thanks!) we used a Source Four with a confetti gobo, scroller and Altman color wheels.  With a total of 8 Source Fours with turning color wheels loaded onto 100' of truss, it was an amazing affect.  Sometimes you just have to borrow from the past.  The confetti affect was so amazing the next day event asked us to use the same affect for their show.  

Thank you for all your suggestions from my past post. Bonnie
Logged
Pages: [1]   Go Up
 

Page created in 0.024 seconds with 19 queries.