ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Cable Bridge  (Read 1310 times)

Ron Schroeyens

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 90
Cable Bridge
« on: May 16, 2005, 09:31:51 pm »

Cable Bridge truss are they attached to the front and rear truss or are they flown separate

Dustin Strobush

  • Newbie
  • *
  • Offline Offline
  • Posts: 38
Re: Cable Bridge
« Reply #1 on: May 17, 2005, 07:17:02 am »

I have only ever seen them flown Seperate.  That way you still have individual control over all the trusses.

Michael E.

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 379
Re: Cable Bridge
« Reply #2 on: May 17, 2005, 12:33:28 pm »

Usually attachted to the truss the pick comes from. IE if it's the cable loom from the downstage (IE "front"), then it's attached to the downstage, but the end of the pick is a seperate point.

Really this depends on the specific gig. We've done cable bridges from the downstage to the mid to the upstage for some. It all depends on the weight, location of the main trusses, where the cables need to end up, and if the client doesn't want them to be seen.
I'd rather be sailing
Pages: [1]   Go Up

Page created in 0.05 seconds with 22 queries.