ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Hog PC  (Read 1458 times)

Ronnie Blenden

  • Full Member
  • ***
  • Offline Offline
  • Posts: 166
Hog PC
« on: May 15, 2005, 04:40:38 PM »

I just bought a Hog PC DMX Widget and have the Hog PC software.  I am going to attempt to use this to make basic scene changes for some Color Pro HX I bought and also a few other "cheap" color changers.  This is just for a traveling club band and I am not expecting to provide concert level lighting shows.  Just controlling them for front wash and some rear color change.  Has anyone used this setup in this manner before?  I will be attempting to make all programs via computer and mouse.  I don't own the programming or playback wings.  Any troubles here?  If anyone has experience with something like this please, any input would be helpful.  I have not got hands on  yet, still waiting on shipment from Lightbroker.
Logged

Klights55

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: Hog PC
« Reply #1 on: May 15, 2005, 08:55:07 PM »

Should work just fine according to the Highend website, the Highend rep I talked to and my vendor.  I am getting a tabletPC and HogIIIPC software to use as a remote focus and backup for my iPC.

Kurt Ottinger
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 18 queries.