ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Chauvet qspot 260led control  (Read 2537 times)

Hank Staples

  • Newbie
  • *
  • Offline Offline
  • Posts: 33
Chauvet qspot 260led control
« on: February 13, 2011, 11:21:56 pm »

About to take delivery of a couple of Chauvet qspot 260led fixtures. I am an admitted total noob when it comes to lighting  :o ..so my question. What are you guys using to control these..or any of your dmx moving head lighting? I'm not looking to break the bank, but I don't want something too complicated either.
Logged

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1605
Re: Chauvet qspot 260led control
« Reply #1 on: February 13, 2011, 11:34:06 pm »

What are your applications and expectations?
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

Hank Staples

  • Newbie
  • *
  • Offline Offline
  • Posts: 33
Re: Chauvet qspot 260led control
« Reply #2 on: February 15, 2011, 08:13:36 pm »

Mainly I will be using these for smal/mid sized band setups. The only previous intelligent lighting experience I have is with Martin 812 Roboscans a few years back. I realize these aren't built as well..but I won't be using them on a daily or sometimes even a weekly basis.
Logged

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1605
Re: Chauvet qspot 260led control
« Reply #3 on: February 16, 2011, 07:47:30 pm »

ADJ/Elation Showdesigner 1, new or used, best controller for the $$, very powerful and very useful for live work. Be prepared to spend some time learning to program, but it will be well worth it.
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

Fernando Lopez

  • Full Member
  • ***
  • Offline Offline
  • Posts: 134
Re: Chauvet qspot 260led control
« Reply #4 on: February 26, 2011, 08:31:37 am »

About to take delivery of a couple of Chauvet qspot 260led fixtures. I am an admitted total noob when it comes to lighting  :o ..so my question. What are you guys using to control these..or any of your dmx moving head lighting? I'm not looking to break the bank, but I don't want something too complicated either.

Make sure that the controller you get can handle 14 dmx channels

A chauvet obey 40 is an inexpensive controller that will do the job. Albeit the qspot 260 works sound active it shines with dmx as with all moving heads
Logged

ProSoundWeb Community

Re: Chauvet qspot 260led control
« Reply #4 on: February 26, 2011, 08:31:37 am »


Pages: [1]   Go Up
 



Page created in 0.041 seconds with 23 queries.