ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: speaker cable question  (Read 674 times)

arlo

  • Newbie
  • *
  • Offline Offline
  • Posts: 34
    • http://www.kidbismarck.com
speaker cable question
« on: January 06, 2005, 08:20:45 pm »

Hello
I'm new to the sound game, hence this question-

I want to wire up my amps outputs to NL4's. I ordered 12 ga 2 conductor speaker wire from a sound company.

Now in the rack my old band had, these conductors were separate and then our soundman used shrink to tidy it up.

The speaker wire I was sent- the conductors are already in the same cabling. It's just one black cable with a white wrap inside and then the conductors inside that.
Can I use this cable like this? To wire from my outputs to the NL4's?
Any help would be appreciated. I'm just learning but am really interested. Thanks
Logged

Tom Manchester

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3034
    • http://www.electrosoundsystems.com
Re: speaker cable question
« Reply #1 on: January 06, 2005, 11:18:13 pm »

yes, there is no problem at all using it like this. the only catch is if you are making speaker cables since this wire is only 2 conductor then you can only use 2 conductors of the nl4, which is fine unless you have your boxes biamped. but yes, you can use that wire in the rack.
Logged
-Tom
Electro Sound Systems
Pages: [1]   Go Up
 

Page created in 0.025 seconds with 21 queries.