ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Sub-mixer - 4-8 inputs  (Read 924 times)

Alex Keatinge

  • Newbie
  • *
  • Offline Offline
  • Posts: 24
Sub-mixer - 4-8 inputs
« on: December 16, 2004, 04:39:05 PM »

I'm looking for a small sub-mixer (rack or not) that I can use for sub-mixing when I need additional channels.

I have an older model Mackie 1202 and that has the right feature set (minimum 4 mic pre's with inserts, pre-fade aux send, PFL monitoring) but was considering either getting a new model with the XDR pre-amps (is it worth it??) or getting something similar/upgraded from another manufacturer. Size is important and rack-mount is fine too.

Any recommendations?
Alex Keatinge
The Melonheads

Evan Kirkendall

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6824
Re: Sub-mixer - 4-8 inputs
« Reply #1 on: December 16, 2004, 06:09:30 PM »

I would recomend getting the newer 1202. The XDR preamps are nice... You may also want to get the 1402, its got a few more channels just in case...
Not all change is good change.
Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.033 seconds with 15 queries.