Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[110dbmichael]

any one have an idea as to what the Lake system use for remote control?

let me tell you what I am looking at...

I use a DM2000 and the computer control is via USB connection I use a tablet PC (which is super handy for certain adjustments) and would like to figure out how I can walk the room with my puter and control the console... thought it to be handy especiall considering I am mixing this series of concerts in 5.1 surround (yes speaker stacks in the rear) and to check and adjust from different positions would be nice.

I had one friend tell me a blue tooth USB interface might be the way to go but from what I can tell that has distance limitations... any ideas???

Michael

[Brad Irving]

Quote:

any one have an idea as to what the Lake system use for remote control?

The Lake system is using WiFi to communicate, the lake system uses Cat5 and 50Ohm Connectors to links the units together. I don't remember the company but someone has a wireless wifi system that works with the PM1D thur serial port.

[Mac Kerr]

ProSoundMixer wrote on Sat, 30 October 2004 02:00

The Lake system is using WiFi to communicate, the lake system uses Cat5 and 50Ohm Connectors to links the units together. I don't remember the company but someone has a wireless wifi system that works with the PM1D thur serial port.

I believe the PRAM Technologies WSL-1 wireless serial link will work with a PM1D. I know Henry had a PM1D engine in the shop for a while in order to work out the kinks, I assume he was successful. The WSL-1 will work with pretty much any device that uses RS-232, or RS-485 for control.

Mac

[Brad Irving]

MacKerr Wrote

Quote:

PRAM Technologies WSL-1 wireless serial link will work with a PM1D

Yes, that is what the unit was called and it did work in our shop also. I havn't heard of anyone using it at a live show, YET.

[Juan Turro]

Yes, the PRAM has been used in live application many times.  I cane name one company, ATK, that has done so but I have also have seen it used by other with a PM1D.

We have a PRAM unit and it works very well in various applications.  We generally use it to tweak Soundwebs driving the PA.

Speaking with Henry at PRAM he mentioned that it took some tweaking to get the PRAM unit to talk with a PM1D reliably as there were some synchronization/timing issues that needed to be right.

Juan

[Phillip_Graham]

JT44 wrote on Sun, 31 October 2004 11:18

Yes, the PRAM has been used in live application many times.  I cane name one company, ATK, that has done so but I have also have seen it used by other with a PM1D. We have a PRAM unit and it works very well in various applications.  We generally use it to tweak Soundwebs driving the PA. Speaking with Henry at PRAM he mentioned that it took some tweaking to get the PRAM unit to talk with a PM1D reliably as there were some synchronization/timing issues that needed to be right. Juan

What type of functionality on the PM1d were they accessing through the PRAM?

[Mac Kerr]

I can't speak for ATK, but you could control anything that is available in PM1D Editor.

Mac

[Juan Turro]

The link allowed PM1D editor to talk to the console as if it were connected by a cable.  As far as I am aware all the functions of the Yamaha software were available.  The applications I am most aware of is using the PM1D as a monitor desk and allowing the operator walk out to the stage monitors and dial in the mix including EQ.  A tablet style PC is typically used.

Juan

[Josh Evans]

I think there is a big difference between controling a PM1D and a DM2000. Not sure about the PM1D, but Iv talked to some folks that have done this with two machines.  One tablet with WiFi, and another regular cheap workstation with network acces, usb, running the DM2000 software.  Just setup a regular network and with either windows remote desktop or VNC control the workstation with the tablet.  There are some other ways of doing wireless serial but this is USB, so those wont work.

cheers,

[Juan Turro]

jevans wrote on Mon, 01 November 2004 17:38

I think there is a big difference between controling a PM1D and a DM2000. Not sure about the PM1D, but Iv talked to some folks that have done this with two machines.  One tablet with WiFi, and another regular cheap workstation with network acces, usb, running the DM2000 software.  Just setup a regular network and with either windows remote desktop or VNC control the workstation with the tablet.  There are some other ways of doing wireless serial but this is USB, so those wont work. cheers,

This is true today.  Like I just mentioned in a previous post it is currently being developed for USB.  It may not ultimately work but the guys at PRAM think it is possible using USB and they are working on such a device.  The two machine scenario has been done for many years.  I have done it myself but not have been happy with the performance.

Juan

[ProSoundWeb Community]