ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: Low Rider 18s  (Read 5692 times)

Tim Padrick

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5008
Re: Low Rider 18s
« Reply #10 on: October 19, 2004, 01:21:51 am »

I'd use a bridged CE4000 to drive a pair of those drivers.  This will give you upwards of 1600w per driver, with minimal power draw from the AC supply

Bruce Holt

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: Low Rider 18s
« Reply #11 on: October 19, 2004, 10:41:36 pm »

Jeremy,

I also am in the process of building 2-18" cabs with Low Riders.  I wrote a post in the Peavey boards about the cubic feet of the enclosure and you can access it here...

http://forums.peavey.com/default.asp?action=9&read=67098 &fid=40

The Peavey rep wrote back and it was quite helpful...just a hint.. don't confuse internal cubic feet with external cubic feet. They can be a few (cubic)feet apart when running your dimensions.

Take care,

BH
Logged

Bruce Holt

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: Low Rider 18s
« Reply #12 on: October 19, 2004, 10:44:10 pm »

Jeremy,

I see that link did not work... try this... http://forums.peavey.com then go to Architectural Acoustics
Click on Speakers and you will see my post..

Hope it helps.

BH
Logged

bgavin (Bruce Gavin)

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 266
Re: Low Rider 18s
« Reply #13 on: October 22, 2004, 12:05:34 am »

I added the Low Rider data to my spread sheet.
Logged
Pages: 1 [2]  All   Go Up
 

Page created in 0.024 seconds with 18 queries.