ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: Sub Rentals in the Detroit Area  (Read 2750 times)

Paul H

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
    • http://www.XSLProductions.com
Re: Sub Rentals in the Detroit Area
« Reply #10 on: September 01, 2004, 12:02:45 am »

Actually, we use the 2400 for the tops now and a Mackie 1400i bridged for the subs.  

What do you think is the best configuration for the system?

Speakers - 4 Eliminator tops (2 of them are the i version)
Subs - 2 Eliminators
Amps - PLX 2402, Mackie 1400i, Crown XLS 602

We don't use the Crown in the current configuration, just the QSC at 4 ohms per side for the tops (2 per side) and the Mackie bridged for the subs.

I'll be sure to set a 45 hz filter when we get the subs back from reconing.  I bet it was us messing with the subharmonics synth on the driverack that messed up the cone.  Oops!
Logged

JR Rager

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
Re: Sub Rentals in the Detroit Area
« Reply #11 on: September 01, 2004, 08:25:55 am »

Your configuration should be fine. More than likely you will find that the system will probably be punchier and perceived loudness will be greatly improved with some more head room. It should also sound tighter and more acoustical, as now you won't be muddying up the bass with all the bonus distortion from the driver freaking out from the "sub Harmonic" frequencies...lol.
Logged
Pages: 1 [2]  All   Go Up
 

Page created in 0.039 seconds with 19 queries.