ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: dispersion  (Read 2240 times)

Chris Cowley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 644
    • http://www.humhead-digital.co.uk
dispersion
« on: July 07, 2004, 01:57:46 pm »

has anyone got any dispersion graphs for LABs?
Logged
GO YOU BIG RED FIRE ENGINE!!!!!!!!!

Mark Seaton

  • Full Member
  • ***
  • Offline Offline
  • Posts: 142
Re: dispersion
« Reply #1 on: July 07, 2004, 02:45:13 pm »

Dispersion is entirely dependent on the number of boxes.  You can determine a lot just by dimensions.  The orientation of the sub may have some effect, particularly with placing 4 together with the mouths flaring out from the center, but if it did have any effect, the effect would mostly be noticed above maybe 50-75Hz, and most easily examined near 75Hz.  If someone wants to do some reasearch, I would test some different configurations at ground level directly on axis, 90 deg, and 180 deg at maybe 4 meters or more.  If you find some significant attenuation at 90 degrees, you can start moving forward and watch to see where you hit -6dB relative to on axis for a given frequency.
Logged
Mark Seaton
Seaton Sound, Inc.
"Make no little plans; they have no magic to stir men's blood..." - Daniel H. Burnham
Pages: [1]   Go Up
 

Page created in 0.033 seconds with 18 queries.