Topic: LSP dxf files converted for use with 18mm plywood (Read 6274 times)

Jeremy Bridge · « **on:** June 04, 2004, 12:55:26 AM »

If anyone is interested I have completely conveted the dxf files located on the LSP documentation for use with 18mm plywood (metric).

We have build 4 subs with 8 more on the way so I know the conversions are right Smile

I have also added a batton so that you can put a grill on it if you like.

It might make things a little easier for some. Especially those using a CNC router and converting the files for use.

Just e-mail me if you would like a copy.

David Haulman · « **Reply #1 on:** June 19, 2004, 07:44:27 PM »

Could I get your updated design for lab sub. I just realized that I had the 3/4 plywood printed out. Thanks Homer

David Trotter · « **Reply #2 on:** June 29, 2004, 06:12:15 AM »

I would love a copy of those files as i am in the Uk and we only have 18mm and use metric.

Do you have them in PDF too?

cheers mate

dleet_83@yahoo.com

Cred · « **Reply #3 on:** June 29, 2004, 10:28:26 AM »

I was about to start construction of Labsub Ver.3.0 in a couple of days. I would be very grateful to have a copy of the 18mm drawings.

Thanks,

Sam

mail me at: cred@rediffmail.com

raj · « **Reply #4 on:** June 30, 2004, 01:39:27 AM »

If you put up the 18mm drawings on the forum it will be useful to all

Ernie Black · « **Reply #5 on:** June 30, 2004, 11:32:29 AM »

Jeremy has sent me the drawings and I have posted links to them on the LSP Documentation page. Enjoy!

Jeremy Bridge · « **Reply #6 on:** July 01, 2004, 12:01:23 PM »

Ernie I am going to PDF them at work tommorrow as well, that way everyone can open them Smile

But the link to the 3rd drawing is not working??

Ernie Black · « **Reply #7 on:** July 01, 2004, 02:31:24 PM »

Fixed now, Jeremy. It was a file naming issue: you had named drawing 3 as Lab_ and the others as LAB_ and I didn't notice this; since the names appeared to be the same except for the number, I simply copied and pasted each filename in the hyperlinks and changed the number accordingly. (Unix convention, don't you know: case sensitive, unlike Winders, so the system looked for LAB_18mm_drawing_3.dwg and didn't find it.)

Good show on the PDF's, send them to me when you get them done and I'll put them up.

raj · « **Reply #8 on:** July 07, 2004, 01:19:00 AM »

Dear Ernie,
I have sent you the drawings by Mr Jeremy Bridge in pdf format by e-mail I hope you got them

Ernie Black · « **Reply #9 on:** July 07, 2004, 09:11:00 AM »

Yes, and they are now posted and linked from the LSP Documentation page. Thanks!

ProSoundWeb Community

Author Topic: LSP dxf files converted for use with 18mm plywood (Read 6274 times)

Jeremy Bridge

LSP dxf files converted for use with 18mm plywood

David Haulman

Re: LSP dxf files converted for use with 18mm plywood

David Trotter

Re: LSP dxf files converted for use with 18mm plywood

Cred

Re: LSP dxf files converted for use with 18mm plywood

raj

Re: LSP dxf files converted for use with 18mm plywood

Ernie Black

Re: LSP dxf files converted for use with 18mm plywood

Jeremy Bridge

Re: LSP dxf files converted for use with 18mm plywood

Ernie Black

Re: LSP dxf files converted for use with 18mm plywood

raj

Re: LSP dxf files converted for use with 18mm plywood

Ernie Black

Re: LSP dxf files converted for use with 18mm plywood