ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [All]   Go Down

Author Topic: LSP dxf files converted for use with 18mm plywood  (Read 4530 times)

Jeremy Bridge

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
LSP dxf files converted for use with 18mm plywood
« on: June 04, 2004, 12:55:26 am »

If anyone is interested I have completely conveted the dxf files located on the LSP documentation for use with 18mm plywood (metric).

We have build 4 subs with 8 more on the way so I know the conversions are right Smile

I have also added a batton so that you can put a grill on it if you like.

It might make things a little easier for some.  Especially those using a CNC router and converting the files for use.

Just e-mail me if you would like a copy.
Logged

David Haulman

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 66
Re: LSP dxf files converted for use with 18mm plywood
« Reply #1 on: June 19, 2004, 07:44:27 pm »

Could I get your updated design for lab sub. I just realized that I had the 3/4 plywood printed out. Thanks Homer
Logged

David Trotter

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 66
Re: LSP dxf files converted for use with 18mm plywood
« Reply #2 on: June 29, 2004, 06:12:15 am »

I would love a copy of those files as i am in the Uk and we only have 18mm and use metric.

Do you have them in PDF too?

cheers mate

dleet_83@yahoo.com
Logged

Cred

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
    • http://www.diyaudio.com
Re: LSP dxf files converted for use with 18mm plywood
« Reply #3 on: June 29, 2004, 10:28:26 am »

I was about to start construction of Labsub Ver.3.0 in a couple of days.  I would be very grateful to have a copy of the 18mm drawings.

Thanks,

Sam

mail me at: cred@rediffmail.com
Logged
Sam

raj

  • Full Member
  • ***
  • Offline Offline
  • Posts: 124
    • http://-
Re: LSP dxf files converted for use with 18mm plywood
« Reply #4 on: June 30, 2004, 01:39:27 am »

If you put up the 18mm drawings on the forum it will be useful to all
Logged
RL

Ernie Black

  • SR Forums
  • Full Member
  • *
  • Offline Offline
  • Posts: 190
    • http://www.standingstone.com
Re: LSP dxf files converted for use with 18mm plywood
« Reply #5 on: June 30, 2004, 11:32:29 am »

Jeremy has sent me the drawings and I have posted links to them on the LSP Documentation page. Enjoy!
Logged
Ernie Black, Code Warrior
ProSoundWeb Forums Webmaster

Jeremy Bridge

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: LSP dxf files converted for use with 18mm plywood
« Reply #6 on: July 01, 2004, 12:01:23 pm »

Ernie I am going to PDF them at work tommorrow as well, that way everyone can open them Smile

But the link to the 3rd drawing is not working??
Logged

Ernie Black

  • SR Forums
  • Full Member
  • *
  • Offline Offline
  • Posts: 190
    • http://www.standingstone.com
Re: LSP dxf files converted for use with 18mm plywood
« Reply #7 on: July 01, 2004, 02:31:24 pm »

Fixed now, Jeremy. It was a file naming issue: you had named drawing 3 as Lab_ and the others as LAB_ and I didn't notice this; since the names appeared to be the same except for the number, I simply copied and pasted each filename in the hyperlinks and changed the number accordingly. (Unix convention, don't you know: case sensitive, unlike Winders, so the system looked for LAB_18mm_drawing_3.dwg and didn't find it.)

Good show on the PDF's, send them to me when you get them done and I'll put them up.
Logged
Ernie Black, Code Warrior
ProSoundWeb Forums Webmaster

raj

  • Full Member
  • ***
  • Offline Offline
  • Posts: 124
    • http://-
Re: LSP dxf files converted for use with 18mm plywood
« Reply #8 on: July 07, 2004, 01:19:00 am »

Dear Ernie,
I have sent you the drawings by Mr Jeremy Bridge  in pdf format by e-mail I hope you got them
Logged
RL

Ernie Black

  • SR Forums
  • Full Member
  • *
  • Offline Offline
  • Posts: 190
    • http://www.standingstone.com
Re: LSP dxf files converted for use with 18mm plywood
« Reply #9 on: July 07, 2004, 09:11:00 am »

Yes, and they are now posted and linked from the LSP Documentation page. Thanks!
Logged
Ernie Black, Code Warrior
ProSoundWeb Forums Webmaster

Jeremy Bridge

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: LSP dxf files converted for use with 18mm plywood
« Reply #10 on: July 08, 2004, 10:24:54 am »

I also should have noted, Ernie, that these plans are MUCH easier to build completely in metric.   The imperial measurements are ugly.

Perhaps you could throw that in the blurb.
Logged

Ernie Black

  • SR Forums
  • Full Member
  • *
  • Offline Offline
  • Posts: 190
    • http://www.standingstone.com
Re: LSP dxf files converted for use with 18mm plywood
« Reply #11 on: July 08, 2004, 10:52:33 am »

So noted!
Logged
Ernie Black, Code Warrior
ProSoundWeb Forums Webmaster

PowerSound

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
    • http://www.powersound.be
Re: LSP dxf files converted for use with 18mm plywood
« Reply #12 on: July 11, 2004, 06:08:31 pm »

I've a question about your converted plans.

How did you insert the baton for the grill ?

Are this batons showed on the new plans ?

What are the dimensions of these ? Are they making the whole contour of the throat ? And what about the Mouth Cross Brace ?

Do you have any pictures of YOUR builded LABHORNS ? With and without the grill ?

Tnx
Logged
Ooooooooooouuuuuuuuuuuuuuhhh, What does this button doooooooooooooooooooooooo ?????

Jeremy Bridge

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: LSP dxf files converted for use with 18mm plywood
« Reply #13 on: July 22, 2004, 01:51:42 pm »

The batton is simple.

Its just a frame of 18mm x 18mm  strips of wood that are set back into the mouth 2cm.

The braces, and flare have been pushed back a tiny bit to acompany the batton and grill, however there should be little to no difference in sound.

I should have pictures shortly.
Logged
Pages: 1 2 [All]   Go Up
 

Page created in 0.064 seconds with 20 queries.