ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Single 12" Subwoofer Idea - What do you think?? Design inside  (Read 5159 times)

Josh Billings

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
    • http://www.mindboxmedia.com/soundsystem

I'm thinking about giving this a shot.

Anybody ever done ANYTHING like this before??

From my measurements it's abotua 10' horn

Basically it goes arround the box inside like a curly slide @ a playground. I figured w/ a 12" driver (Like the lab) you could make a box approx 26-28" wide x 3' tall & 3' deep and have a fairly deep response w/ it.

What's your opinions on this idea?

1. Will it go deep?
2. Will it be LOUD?
3. Is it just too expensive to build?
4. Would the LAB speaker work?
5. Wold somebody help me try & build one in Orange County

I'm basically looking for a box that goes deep, easy to power, and very portable. the vegas and LA400s are very portable, but the Vegas suck & the LAs don't go too deep.

Give me some feedback.

-Josh

To explain it as much as possible.
The path of the speaker goes down, to the right then up and away from you into the 2nd layer of the speaker. Then it would go left on the top then down then to the right out the front of the speaker in approximately a 12" wide by 16" high mouth of the horn.
Logged

Al Limberg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1482
Re: Single 12" Subwoofer Idea - What do you think?? Design inside
« Reply #1 on: May 29, 2004, 09:00:38 PM »

Josh,
Before you started slicing and dicing plywood, I strongly recommend a trip to the archives of the old LSP and a search of posts by Tom Danley, Jeff Robinson and John Sheerin.  A search of the LAB archives from November 2001 through January 2002 under the same names and perhaps 'subwoofer' will probably be worthwhile too.  Just shooting sound thru a tunnel doesn't make a horn.  The horn serves as a compression loading device coupling the cone to the air.  Also take a good look at the relationship bewtween mouth size and low frequency response.  With a mouth 21"x 43 1/2", it still requires a stack of 4 or preferably 6 units to reach maximum low frequency extension and proper coupling for the Lab Sub.

Take some time and follow the path so adeptly prepared by the real bass/speaker gurus around here.

HTH,
Al
Logged
If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get one million miles to the gallon, and explode once a year killing everyone inside - Robert X. Cringely

Graeme Goodacre [Centauri

  • Full Member
  • ***
  • Offline Offline
  • Posts: 133
    • http://www.centauriaudio.com.au
Re: Single 12" Subwoofer Idea - What do you think?? Design inside
« Reply #2 on: May 30, 2004, 03:20:37 AM »

Been there, done that.  When you actually start applying dimemsions, you soon find out that it won't fit.  Even with a single 12, the best layout is still similar to the LabSub with maybe a little more spiral overlap.

In a cad program, try modelling the straight flare, cutting it in sections, and folding it around - you soon realise the limitations of physical size!

Cheers
Graeme
Logged

JimCreegan

  • Full Member
  • ***
  • Offline Offline
  • Posts: 202
Re: Single 12" Subwoofer Idea - What do you think?? Design inside
« Reply #3 on: June 01, 2004, 12:38:16 AM »

EAW's done it see Link

 http://www.eaw.com/products/item_new.phtml?part_number=09998 96

JimC

Sorry I didn't see your comment that the La400 doesn't go low enough.  The more you stack together the lower they go, from what I understand.

jim
Logged

raj

  • Full Member
  • ***
  • Offline Offline
  • Posts: 124
    • http://-
Re: Single 12" Subwoofer Idea - What do you think?? Design inside
« Reply #4 on: June 01, 2004, 07:56:08 AM »

I think  what you want is being made by someone in the UK , its known as the LOONEY BIN , they boast of a specially designed  1000W18"driver with a 5"voice coil and an extralarge magnet  for higher SPL , but I doubt if it will go down to 20 hz as the Lab Sub ,
Logged
RL

Graeme Goodacre [Centauri

  • Full Member
  • ***
  • Offline Offline
  • Posts: 133
    • http://www.centauriaudio.com.au
Re: Single 12" Subwoofer Idea - What do you think?? Design inside
« Reply #5 on: June 01, 2004, 08:05:37 AM »

JimCreegan wrote on Tue, 01 June 2004 14:38

EAW's done it see Link


I haven't personally seen one of these, but from what I can gather it is a typical Z-fold, and not a curly one like Josh was suggesting.

Cheers
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 20 queries.