Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Brad Litz]

LABsub v3.0 is finally together and acoustic measurements have been made. I put everything on a new web page. Page through it to the end to find the measurements.

Post questions and comments here. I'll answer as best I can and try to keep the site up to date.

http://www.geocities.com/hulkss

[Rick]

Nice stuff Brad.  
You did a beautiful A+ job of building those LAB’s
Its inspiring, that’s for sure !

[Kurt Rivers]

I cant wait to see the final pictures of your home theater if your gonna post them!

[Brad Litz]

Check out the new ModelPress files and FREE viewer on my web page. Great measurement capability. View the assembly or one piece at a time. Easily see what you need to build 'em. Try the explode button. Cool.

http://www.geocities.com/hulkss

[Timmahh]

Brad, Great tool, i like it much, fantastic for the cut sizes.  one question?    I ve not seen it show any of the angles in degrees.  Am I missing them or are they not there?
thanx in advance....
oh yea, where can we pick up that dandy drill jig?  i seen you list in on the old forum, but not seen it since.
GR8 Job, your subs are simply beatiful..

[Sound Construction]

Timmahh, there's a reference to the manufacturer of the pocket jig on Brad's new site

[Timmahh]

yea, just ordered the jig.... should have it in a few days. thanx

[Brad Litz]

Timmahh wrote on Wed, 26 May 2004 20:55

Brad, Great tool, i like it much, fantastic for the cut sizes.  one question?    I ve not seen it show any of the angles in degrees.  Am I missing them or are they not there? thanx in advance.... oh yea, where can we pick up that dandy drill jig?  i seen you list in on the old forum, but not seen it since. GR8 Job, your subs are simply beatiful..

Just click on 2 edge angle when in measurement mode. Be careful! The angle between edges is not the same as the angle between surfaces on compound cut parts.

You can get pocket hole tools here:
http://www.kregtool.com/

[Timmahh]

Gr8 Thanx Brad!!!!!!!!!

[Brad Litz]

First photo of LABsub v3.0 system installed.
Tunes at last

http://www.geocities.com/hulkss/TheaterPhotos.html