Thanks for all replys,
Yeah I know that temperature rise when lots of power is used and it is normal for the drivers to heat up (I have studied this), plates were just worm, not hot. Amps were not clipping, just tickling the clip lights from time to time, not often.
I was confused becouse the fact discused here that Labs can take up to 3000 wats per box. So the question is,
"how hot then" the plates (drivers) will be?I will open this afternoon the boxes to see how the drivers survived the party, but I dont expect any damages, box is very well sealed so there was no leaking at all.
Those boxes are damn heavy. I didnt have time to put any handels or weels so it was dificult to lift them and carry to the stage.
Lets ask Mr. Danley to invent some antigravity device to carry our equipment.
I will soon finish the cosmetics for the Labs (paint or carpet, still in dillema, handels, weels....) and make a choise from the 200+ pictures taken during assembly of the Labs and post some link for you to see them.
Any more comments on heating are wery welcomed. I am still afraid to force them to one C12 per box (2400W at 4ohm bridged).
Take care all,
MarjanM