ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Lighting type question.  (Read 1464 times)

Mike Pyle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2485
Lighting type question.
« on: May 05, 2004, 06:42:54 pm »

What kind of light fixture would be used to create sharp, colored, multiple beams like this?

http://www.rosco-ca.com/intl/applications/haze.jpg

Thanks!
Mike
Logged
Mike Pyle
Audiopyle Sound
707-315-6204
Dealer: Yorkville, EV, QSC, RCF, KV2, FBT, EAW, Danley, SLS, Turbosound, dBTech
 APB,A&H,Audix,Shure,Powersoft,RoadReady,K&M,Ultimate ,Global Truss,DENON,Chauvet,Elation...

Adam Feldstain

  • Full Member
  • ***
  • Offline Offline
  • Posts: 156
    • http://www.pro-opticlighting.com
Re: Lighting type question.
« Reply #1 on: May 05, 2004, 06:50:42 pm »

It’s hard to tell from the one pic. But I would say just about any Moving head or scanner with a prism, or a GOBO and a good lens.

You might look at Lower end Effect Lights like a star flower. However they tend to usually be only about 50 or 100 watts, not very bright for this type of application.

What kind of application do you want that effect for?
Logged
Adam Feldstain
Pro-Optic Lighting
djallf AT djallf DOT com

Rob Timmerman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2025
Re: Lighting type question.
« Reply #2 on: May 05, 2004, 06:52:06 pm »

A Source 4 (or other ERS) with a gobo will work.
Logged

Nick S.

  • Full Member
  • ***
  • Offline Offline
  • Posts: 102
Re: Lighting type question.
« Reply #3 on: May 06, 2004, 11:03:56 am »

I've done a similar effect on the cheap using Strand Profiles, with the appropriate gobos and gels in. You'd benefit from a hazer to pick out the beams of light.
Logged
Pages: [1]   Go Up
 

Page created in 0.024 seconds with 19 queries.