Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jay Cropper]

I hope I don't inflame Craig by posting this message, but here goes.  Could anybody direct me to someone who could potentially build a couple for a church install?  There was a guy/professional advertising on this website in the white pages some time ago, but I've been unable to find anything on him as of late.

[Ray Abbitt]

gotbass wrote on Wed, 05 May 2004 01:02

I hope I don't inflame Craig by posting this message, but here goes.  Could anybody direct me to someone who could potentially build a couple for a church install?  There was a guy/professional advertising on this website in the white pages some time ago, but I've been unable to find anything on him as of late.

You might get better results if you happened to post your location. Rather than looking for a commercially built version maybe you could find somebody in your area that is already building some that would help you out with a couple more. But if you have them built and they have to be shipped half way accross the country, you would probably be better off just buying SPL BDEAP 32's.

-ray

[Jay Cropper]

"You might get better results if you happened to post your location"  I'm located in the Salisbury,Maryland area.  

[Dan Timon]

This guy, Keith Mack,  is in Takoma Park, MD and I believe he has the LABhorn measurements loaded onto his CNC machine. He has not made a set but he has built a ton of pro sound speakers.

http://www.kmackracks.com

Regards,

Dan Timon

[Craig Leerman]

Quote:

I hope I don't inflame Craig by posting this message

No problem!  As long as a company does not build this design for profit/commercial sales, its OK. We understand that many folks don't have the woodworking chops or access to the proper machines (saws, routers, air compressor, etc) to build them. Getting a small wood shop, cabinet shop, or carpenter to cut up the parts for you would not be an issue. I would suggest that you would find a small shop that would allow you to assist in the parts cutting, as well as the assembly of the cabinets, as this was intended to be a "hands on" learning project.  Any good small cabinetmaking shop or quality carpenter shop with a good table saw should be able to make up all the cuts, even if they don't have a CNC computer machine. In fact, a few folks who have build LAB subs didn't even use a table saw, but instead cut the parts out with a circular saw and a guide bar.

Not only will helping build the subs give you  some more insight to cabinetmaking, but you will improve your woodworking skills, as well as get a real sense of satisfaction of helping make them!

Craig
 

[Ray Abbitt]

Craig Leerman wrote on Wed, 05 May 2004 14:10

Not only will helping build the subs give you  some more insight to cabinetmaking, but you will improve your woodworking skills, as well as get a real sense of satisfaction of helping make them!

This is why I made the suggestion of finding somebody somewhat local to him that was already building subs and offer to help. I'm trying to work out a deal somewhat of that sort myself. I've got the tools and pretty much most of the skills. If somebody came around with materials and the willingness to help with the labor (and or the cost of the materials for my own), we could probably work out an equitable arrangement. The second, third, fourth, etc are going to be a lot easier to build than the first one and I'll still have the jigs (I pretty much make up jigs for anything I'm going to make more than one of.)

-ray
(who loves the smell of sawdust)

[Hamburger]

Quote:

This guy, Keith Mack, is in Takoma Park, MD and I believe he has the LABhorn measurements loaded onto his CNC machine. He has not made a set but he has built a ton of pro sound speakers. http://www.kmackracks.com

Keith is a great guy, he does all the custom AV furniture for the company I work for.  He and I(mostly he) worked on getting the peices put into the computer for 4 LABS.  We ran out of time on that day, and there were a few pieces we didn't have a chance to get into the machine.  I just got thru cutting the horizontal flare pieces last night. His CNC doesn't have the tilt head to do the compound miter stuff.  
Give him a call

Hamburger

"If you're gonna play in Texas, you gotta have a fiddle in the band."

[Trounce Records]

I'm also in a similar situation.  Like bass, hate wood.

I'm in Milwaukee, WI, and need 4-6 LAB subs built by the last week in July.  I have a box truck, and could pick them up within a reasonable (or even an unreasonable) distance.

[Tom Bourke]

Trounce Records wrote on Thu, 13 May 2004 17:43

I'm also in a similar situation.  Like bass, hate wood. I'm in Milwaukee, WI, and need 4-6 LAB subs built by the last week in July.  I have a box truck, and could pick them up within a reasonable (or even an unreasonable) distance.

I have acess to a nice shop but I dont have the money for wood or parts.  Maybe we can work somthing out.  I could use a pair for my self;)

Tom B

[Trounce Records]

We probably could!  Where are you located, and do you have experience with this sort of thing?