ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [All]   Go Down

Author Topic: Woodworking isn't my cup of tea  (Read 4971 times)

Jay Cropper

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Woodworking isn't my cup of tea
« on: May 05, 2004, 04:02:33 am »

I hope I don't inflame Craig by posting this message, but here goes.  Could anybody direct me to someone who could potentially build a couple for a church install?  There was a guy/professional advertising on this website in the white pages some time ago, but I've been unable to find anything on him as of late.
Logged

Ray Abbitt

  • Full Member
  • ***
  • Offline Offline
  • Posts: 130
Re: Woodworking isn't my cup of tea
« Reply #1 on: May 05, 2004, 11:25:49 am »

gotbass wrote on Wed, 05 May 2004 01:02

I hope I don't inflame Craig by posting this message, but here goes.  Could anybody direct me to someone who could potentially build a couple for a church install?  There was a guy/professional advertising on this website in the white pages some time ago, but I've been unable to find anything on him as of late.
You might get better results if you happened to post your location. Rather than looking for a commercially built version maybe you could find somebody in your area that is already building some that would help you out with a couple more. But if you have them built and they have to be shipped half way accross the country, you would probably be better off just buying SPL BDEAP 32's.

-ray
Logged

Jay Cropper

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: Woodworking isn't my cup of tea
« Reply #2 on: May 05, 2004, 12:21:13 pm »

"You might get better results if you happened to post your location"  I'm located in the Salisbury,Maryland area.  
Logged

Dan Timon

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 292
Re: Woodworking isn't my cup of tea
« Reply #3 on: May 05, 2004, 01:22:26 pm »

This guy, Keith Mack,  is in Takoma Park, MD and I believe he has the LABhorn measurements loaded onto his CNC machine. He has not made a set but he has built a ton of pro sound speakers.

http://www.kmackracks.com

Regards,

Dan Timon
Logged

Craig Leerman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1389
    • http://www.techworksvegas.com
Flamesuit on
« Reply #4 on: May 05, 2004, 05:10:46 pm »

Quote:

I hope I don't inflame Craig by posting this message


No problem!  As long as a company does not build this design for profit/commercial sales, its OK. We understand that many folks don't have the woodworking chops or access to the proper machines (saws, routers, air compressor, etc) to build them. Getting a small wood shop, cabinet shop, or carpenter to cut up the parts for you would not be an issue. I would suggest that you would find a small shop that would allow you to assist in the parts cutting, as well as the assembly of the cabinets, as this was intended to be a "hands on" learning project.  Any good small cabinetmaking shop or quality carpenter shop with a good table saw should be able to make up all the cuts, even if they don't have a CNC computer machine. In fact, a few folks who have build LAB subs didn't even use a table saw, but instead cut the parts out with a circular saw and a guide bar.

Not only will helping build the subs give you  some more insight to cabinetmaking, but you will improve your woodworking skills, as well as get a real sense of satisfaction of helping make them!

Craig
 
Logged
I'm so old, when I was doing FOH for Tommy Dorsey, to balance out the horn section I would slide their chairs downstage and upstage to mix!


Ray Abbitt

  • Full Member
  • ***
  • Offline Offline
  • Posts: 130
Re: Flamesuit on
« Reply #5 on: May 06, 2004, 02:09:33 am »

Craig Leerman wrote on Wed, 05 May 2004 14:10


Not only will helping build the subs give you  some more insight to cabinetmaking, but you will improve your woodworking skills, as well as get a real sense of satisfaction of helping make them!
This is why I made the suggestion of finding somebody somewhat local to him that was already building subs and offer to help. I'm trying to work out a deal somewhat of that sort myself. I've got the tools and pretty much most of the skills. If somebody came around with materials and the willingness to help with the labor (and or the cost of the materials for my own), we could probably work out an equitable arrangement. The second, third, fourth, etc are going to be a lot easier to build than the first one and I'll still have the jigs (I pretty much make up jigs for anything I'm going to make more than one of.)

-ray
(who loves the smell of sawdust)
Logged

Hamburger

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: Woodworking isn't my cup of tea
« Reply #6 on: May 06, 2004, 08:01:25 am »

Quote:

This guy, Keith Mack, is in Takoma Park, MD and I believe he has the LABhorn measurements loaded onto his CNC machine. He has not made a set but he has built a ton of pro sound speakers.

http://www.kmackracks.com




Keith is a great guy, he does all the custom AV furniture for the company I work for.  He and I(mostly he) worked on getting the peices put into the computer for 4 LABS.  We ran out of time on that day, and there were a few pieces we didn't have a chance to get into the machine.  I just got thru cutting the horizontal flare pieces last night. His CNC doesn't have the tilt head to do the compound miter stuff.  
Give him a call

Hamburger

"If you're gonna play in Texas, you gotta have a fiddle in the band."
Logged

Trounce Records

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
    • http://trouncerecords.com
Re: Woodworking isn't my cup of tea
« Reply #7 on: May 13, 2004, 06:43:32 pm »

I'm also in a similar situation.  Like bass, hate wood.

I'm in Milwaukee, WI, and need 4-6 LAB subs built by the last week in July.  I have a box truck, and could pick them up within a reasonable (or even an unreasonable) distance.
Logged
Ryan Clancy
http://trouncerecords.com
(414) 273-1299

Tom Bourke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1564
    • http://www.cwalv.com
Re: Woodworking isn't my cup of tea
« Reply #8 on: May 15, 2004, 11:30:36 am »

Trounce Records wrote on Thu, 13 May 2004 17:43

I'm also in a similar situation.  Like bass, hate wood.

I'm in Milwaukee, WI, and need 4-6 LAB subs built by the last week in July.  I have a box truck, and could pick them up within a reasonable (or even an unreasonable) distance.


I have acess to a nice shop but I dont have the money for wood or parts.  Maybe we can work somthing out.  I could use a pair for my self;)

Tom B
Logged
I have a mild form of Dyslexia that affects my ability to spell.  I do use spell checking to help but it does not always work.  My form of Dyslexia does not affect my reading.  Dyslexics of the world untie! <a href="http://www.cwalv.com" target="_blank">http://www.cwalv.com</a>

Trounce Records

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
    • http://trouncerecords.com
Re: Woodworking isn't my cup of tea
« Reply #9 on: May 15, 2004, 01:01:37 pm »

We probably could!  Where are you located, and do you have experience with this sort of thing?
Logged
Ryan Clancy
http://trouncerecords.com
(414) 273-1299

Timmahh

  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
    • http://www.chromepony.us
Re: Woodworking isn't my cup of tea
« Reply #10 on: May 17, 2004, 06:02:30 pm »

let me know if you have your needs covered, we re getting ready to build a pair, maybe 2 pair, if we re cutting, maybe we could cut and build them for you, then you could come to michigan and pick them up and load them yourself, or we could do that too, so all you have to do is hual, then plug n play.
we re located in the TriCity area of michigan.  depending on where your at, you could come thru chicago, about 5 hrs from us. or use the ferry from traverse city, about 3 hrs from us... either way, it is a possibility.
let me know!
Logged
I had to do it cuz I'm Just like that!!!!!
Timmahh!!!

Rick

  • Newbie
  • *
  • Offline Offline
  • Posts: 21
Re: Flamesuit on
« Reply #11 on: May 21, 2004, 06:52:48 pm »

Hi all,

If you are not into woodworking, or dont have the tools, do as I did, take your sheets of wood to a laser cutter with AutoCAD drawings.  They charged me $95, and they cut all the pannels, and holes in less that 10min a cabinet ! its great to watch!.   They however dont do miters, so you have to do them yourself, but after that, its just a matter of screwing it all together.

Just my 2 cents worth


Cheers

Rick
Logged

Sound Construction

  • Newbie
  • *
  • Offline Offline
  • Posts: 15
Re: Flamesuit on
« Reply #12 on: May 25, 2004, 12:50:54 am »

what kind of business has a laser cutter? a furniture manufacturer maybe? where would i start looking for such a machine. I'm all for the pride of making my own sawdust, but speed may be of the escence.
Logged

Rick

  • Newbie
  • *
  • Offline Offline
  • Posts: 21
Re: Flamesuit on
« Reply #13 on: May 25, 2004, 03:19:12 am »

Yeah, I like to do the work myself, but in the past Iv had to get 50+ PA cabinets cut, and the laser cutters make that job easy.
They can cut anything from 1/2inch aluminium, to 2inch plywood,  great machines !!

They should just be listed under "laser cutting" in you local directory, im sure you will have one near you.
Have a look around on the web. I can help much being here in New Zealand, but hey, if we have 3 places in my local area, im sure there is someone near you that does laser cutting.

Cheers


Rick
Logged
Pages: 1 2 [All]   Go Up
 

Page created in 0.051 seconds with 20 queries.