ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: ETC dimmers  (Read 1504 times)

O'Die

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
ETC dimmers
« on: April 23, 2004, 05:45:31 pm »

I have ETC L86 modules that will not work correctly with ANY drawer or SSR. This just started happening after a generator switch-over, but has been developing on other dimmers for awhile. They will smoothly run up to around 30%, then bump to full above 30%. In one case they bump up to full at 5%. Usually a new SSR has fixed this problem, but nothing we do seems to help. Tried new control module, resetting everything, etc...
Anyone have any ides?
Logged

RWS

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
Re: ETC dimmers
« Reply #1 on: April 25, 2004, 12:36:01 am »

If you have eliminated the control modules, SCRs, and controller issues, all that seems to be left is bad power. I have had other systems generate progressive malfunctions when bad power is applied along the neutral.  That is only a suggestion to look at, although you may have already done so.
Logged
Pages: [1]   Go Up
 

Page created in 0.038 seconds with 19 queries.