ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Weird Pulse From M7 Mono Output  (Read 4890 times)

Jonathan Schroeder

  • SR Forums
  • Jr. Member
  • *
  • Offline Offline
  • Posts: 51
  • Houston, Tx
Re: Weird Pulse From M7 Mono Output
« Reply #10 on: December 17, 2012, 02:34:26 PM »
Quote from: James Seagus on December 15, 2012, 02:37:15 PM
Well, I fed a hard drive recorder's XLR line input and the pulse was still there.


If your main output is clean, try physically swapping your main outs with your mono outs. See if your mains hum with the mono feed.  That would tell you if it is in the feed (DSP failure/routing issue/ something else) or a problem with the omni output/cabling/ground loop, etc.


Jon

Logged

David Hadfield

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: Weird Pulse From M7 Mono Output
« Reply #11 on: December 29, 2012, 04:12:02 AM »
check the oscilator isn't on - that will give you a burst (if set to do such) from the outputs selected no matter where you patch it.
Logged

ProSoundWeb Community

Re: Weird Pulse From M7 Mono Output
« Reply #11 on: December 29, 2012, 04:12:02 AM »

Pages: 1 [2]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.054 seconds with 25 queries.