Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[theofilos sfina]

Hello

I recently got from a friend this setup

2x
http://www.rcf.it/products/commercial-audio/projectors-monitors-column-speakers/art-325-i
and
http://labgruppen.com/products/c_series/c/c_48_4/

i know its a 4 channels amp and i am not very familiar with PA and im looking a way to run the system
should i use the two channels for input and two for output only and leave the others idle?
should i bridge the AB and CD channels or not?
should i put the volume to max?
i contacted the lab gruppen service and they told me to put the vpl to 118v
im a bit confused
i will like someone  to help me how to hook up both inputs and outputs for ONLY these two speakers
and how to connect if i want to use one subwoofer also (my mixer has two xlr outputs for main and one xlr  for subwoofer-you can arrange what frequencies should go to main and what to the subwoofer http://www.behringer.com/assets/DDM4000_P0167_Rear_XL.png)
so no need for crossfader i think

[EmilBarnabas]

Connect the Left output of the mixer to Ch A input on the amplifier. Connect Speaker output A on the amplifier to your left speaker.

Connect the Right output of the mixer to Ch B input on the amplifier. Connect Speaker output B on the amplifier to your right speaker.

Connect the Subwoofer output of the mixer to Ch C input on the amplifier. Connect Speaker output C on the amplifier to your subwoofer.

You will not be using Ch D on the amplifier.

[ProSoundWeb Community]