Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > LAB: The Classic Live Audio Board

Lost 2 track digital inputs on the back of a PM1D

<< < (3/4) > >>

Eric Chancey:
Wordclock.

Eric Chancey:
Channel view. Note the assignment is correct. The mute group is inactive.

Mac Kerr:

--- Quote from: Eric Chancey on January 30, 2011, 03:06:27 PM ---Channel view. Note the assignment is correct. The mute group is inactive.

--- End quote ---

If you look at the fader view tab of the ch view screen do you see where in the path the audio stops. I think the fader view tab should show you the whole signal path.

Mac

Eric Chancey:
Fader view just shows a display of where the faders on a layer are living. I couldn't find any other information there. Thanks for hanging in there with me Mac, Yamaha is involved now. I'll report back.

Mac Kerr:

--- Quote from: Eric Chancey on January 31, 2011, 01:49:01 PM ---Fader view just shows a display of where the faders on a layer are living. I couldn't find any other information there. Thanks for hanging in there with me Mac, Yamaha is involved now. I'll report back.

--- End quote ---

Sorry, I was thinking of another console, probably a 5D. In any case, in the first tab of the Channel View screen there are 4 input meters, each one at a different part of the chain. Do you see signal on any of them? On the left side are from the top, HA input, EQ input, Gate input, and Comp input. Does signal show up at any of them?

If there is nothing there, I'm out of ideas. Let us know how it works out.

Mac



Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version