Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Johnny Culbertson]

Does anyone know the crossover, PEQ, etc. tuning for the ls608 subs in the Driverack PA+ Wizard? I have a Driverack 260 and noticed that they are supplied for the Driverack PA+ Wizard, but I do not have access to that unit to see what they are. I'm using the subs with a QSC PLX 3602 and either JBL MP415s or MRX512Ms for tops. Thanks.

[Josh Billings]

High pass at like 40 hz or so and low pass at 80-100 hz or so with your filter of choice (i use BW24) and call it a night.

You could boost up around 50 hz to "flatten out the response" as im assuming it falls off the lower it goes, but you'll lose output

Josh Billings

[Glenn A Williams]

Does anyone know the crossover, PEQ, etc. tuning for the ls608 subs in the Driverack PA+ Wizard? I have a Driverack 260 and noticed that they are supplied for the Driverack PA+ Wizard, but I do not have access to that unit to see what they are. I'm using the subs with a QSC PLX 3602 and either JBL MP415s or MRX512Ms for tops. Thanks.

I have the frequency response chart for the LS608 and I own four of them.

There is a 3 db dip at 80 hz which tapers from 103 db 1w1m @ 70hz to 100 db 1w1m@ 80hz and goes back to 103 db1w1m @ 90hz.

[ProSoundWeb Community]